Non-contractual photographs

SupaPore THB

Sterilizing-grade membranes

The SupaPore THB cartridge is a microfiltration cartridge specially designed for air and gas filtration applications requiring high flow rates and low pressure drops.

It uses a naturally hydrophobic expanded PTFE membrane combined with a polypropylene structure and is available with a filtration rating of 0.2 µm in liquid and 0.02 µm in gas.

Request a quote Documentation

SupaPore THB cartridges are intended for air and gas filtration applications where high flow rates and low pressure drops are important criteria.

They use a naturally hydrophobic expanded PTFE membrane that does not wet out on contact with water vapor under normal process conditions. The cartridges are manufactured by thermal bonding without adhesive, pre-flushed with ultra-pure water and individually tested before final assembly.

Each cartridge has an individual identification ensuring full component traceability.

  • Naturally hydrophobic expanded PTFE membrane
  • Polypropylene membrane supports
  • Polypropylene end caps
  • Polypropylene cage and core
  • Filtration:
    • 0.2 µm in liquid
    • 0.02 µm in gas
  • Outer diameter: 71 mm
  • Typical filter area: 0.75 m² per 10″ element
  • Maximum temperature:
    • 80°C with intermittent exposure to air
    • 60°C with continuous exposure to air
  • Recommended maximum differential pressure:
    • Forward flow: 5.0 bar at 20°C; 0.5 bar at 140°C
    • Reverse flow: 3.0 bar at 20°C; 0.5 bar at 140°C
  • Recommended differential pressure for replacement: 2.5 bar
  • Steam and autoclave compatible:
    • 135°C for more than 150 cumulative hours
  • Thermally bonded construction, adhesive-free
  • Testable by:
    • Water Intrusion
    • Bubble Point
    • Diffusion Flow
  • Compliant with FDA CFR Title 21 requirements
  • Lot number identification for full traceability

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS