Glossary of Industrial Filtration

This glossary aims to clarify the main technical terms used in industrial filtration.

Absolute filter

Filter designed to retain the vast majority of particles at a specified filtration rating, with an efficiency generally exceeding 99.98%.

Find out more

Absolute filtration

Filtration process ensuring a very high level of particle retention at a specified filtration rating, generally exceeding 99.98%.

Find out more

Absolute Filtration Efficiency

Classification of a filter element whose retention efficiency at the specified filtration rating exceeds 99.98%.

Find out more

Activated carbon

Highly porous form of carbon used to adsorb organic compounds, particularly to reduce or remove chlorine levels. Many filter cartridges are made using activated carbon.

Adsorption

Adhesion of molecules, atoms, or ionic species from a gas or liquid onto the surface of another substance (solid or liquid), driven by various weak intermolecular forces. A common adsorbent is activated carbon, widely used in filters integrated into filtration processes.

Air filters

Filter elements designed to capture particles, dust or contaminants present in the air within ventilation systems or industrial processes.

Find out more

Air filtration

Process of capturing particles, dust or contaminants present in the air to protect industrial processes, equipment or operators.

Find out more

Air permeability

Ability of a material or filter medium to allow air to pass through it under a given pressure differential.

Annealing

A heat treatment process used to remove the effects of work hardening.

ASHRAE dust

Synthetic dust used to load air filters during laboratory testing (ASHRAE Standard 52).

Autoclaving

Sterilization technique using saturated steam under pressure or superheated water. The combined effect of heat and moisture destroys microorganisms. For a material to be considered sterile, the theoretical probability of detecting a viable microorganism must be below 1%. This corresponds to the Sterility Assurance Level (SAL) as defined by EN 556.

Backflush

Periodic cleaning and/or unclogging process achieved by reversing the flow through a filter.

Backwash

Method for regenerating and/or unclogging a filter by forcing a cleaning fluid through it in the opposite direction to the filtration flow.

Bacterial challenge

A logarithmic reduction value (LRV) used to measure the efficiency of filters in removing microorganisms from a given suspension.
LRV (Log Reduction Value) = log₁₀ (number of upstream organisms / number of organisms in the filtrate).
To be classified as a sterilizing filter, the logarithmic reduction must be greater than 7 (LRV > 7.0).

Bactericidal

Chemical or physical agent capable of killing bacteria.

Bag filter

Filtration equipment or element using one or more filter bags to retain particles in liquid or air filtration processes.

Find out more

Biocide

Chemical or physical agent that kills microorganisms.

Biofilm

A layer of microorganisms embedded in a solid matrix, adhering to each other and/or to surfaces. The incorporation of pathogenic organisms within biofilms can protect them from the action of biocides, even at high concentrations that would otherwise destroy or inactivate them.

Biofouling

Biological fouling is the formation of an undesirable layer of living organisms on an artificial surface that is in continuous or frequent contact with water.Biological fouling is the formation of an undesirable layer of living organisms on an artificial surface that is in continuous or frequent contact with water.

Blowback

Cleaning process used to break up the filter cake by injecting compressed air in the opposite direction of the filtration flow.

Brix scale (°Bx)

Scale used to measure the concentration of dissolved sugars in a liquid, primarily in beverages, juices, syrups and food processing applications.

Bubble point

Bubble point (integrity test)
Minimum pressure required to force gas through a wetted membrane, used to verify the integrity of a filter medium.

Calendering

Process consisting of passing a filter medium between two rollers (a calender) to modify its surface properties.

Catalyst

Substance that promotes or initiates a chemical reaction without being consumed in the process.

CFD

CFD (Computational Fluid Dynamics)
Computer-based methods and simulations used to analyze and solve fluid flow problems in complex geometries.

CFU

CFU/mL (Colony Forming Units per milliliter)
A measure of the concentration of microorganisms in a given volume, representing the number of viable microbial cells capable of forming colonies.

Chemical sterilization

Sterilization achieved using chemical agents. Commonly used agents include peracetic acid, hydrogen peroxide, and sodium hypochlorite.

Chemisorption

Form of adsorption in which the retained molecules chemically react with the surface of the adsorbent material.

CIP

Mobile CIP (Cleaning-in-Place)
Self-contained, mobile system designed to clean industrial equipment (tanks, piping systems, filters) without disassembly by circulating cleaning solutions.

Find out more

Cleanroom

Controlled environment in which the concentration of airborne particles and contaminants is strictly controlled.

Find out more

Cleanroom filtration

Cleanroom filtration consists of a cascade of filters, with terminal filters that are necessarily absolute (high-efficiency).

Find out more

Coalescence

Phenomenon in which fine droplets dispersed in a fluid merge to form larger droplets, making them easier to separate.

Find out more

Colloid

Extremely fine particle stably dispersed in a liquid, often difficult to separate by conventional filtration due to its very small size.

Find out more

Conductivity

Measurement of a liquid’s ability to conduct electric current, used particularly to assess the concentration of dissolved ions in water.

Find out more

Coulter particle counter

Device used to count and measure the size of particles suspended in a liquid by detecting changes in electrical impedance as they pass through a small aperture.

Cov

COV (Composé Organique Volatil)

Volatile organic compounds (VOCs) are organic substances that can evaporate into the air as gases or vapors, often originating from solvents, fuels or industrial processes.

Find out more

Cross-contamination

Unintentional transfer of biological, chemical or particulate contaminants from one product, piece of equipment or process to another.

Find out more

Cross-Flow Filtration

Type of filtration in which the fluid flows parallel to the surface of the filter medium to minimize clogging.

Find out more

Dead-End Filtration

Type of filtration in which the fluid passes through the filter medium perpendicularly to its surface.

Find out more

Dew point

Dew Point (or Dew Point Temperature)
Temperature at which water vapor contained in a gas begins to condense into liquid form at a given pressure.

Diaphragm pump

Positive displacement pump using a flexible diaphragm with reciprocating motion to transfer fluids, particularly in industrial and filtration processes.

Find out more

Differential pressure

Differential pressure (pressure drop)
Pressure difference measured between the upstream and downstream sides of a piece of equipment or filter medium during fluid flow.

Find out more

Diffusion flow (integrity test)

Measurement used during an integrity test to assess the passage of air through a wetted membrane in order to verify its retention performance.

Find out more

DOP

DOP test (Dioctyl Phthalate test)
Test used to evaluate the efficiency of air filters using an aerosol of calibrated particles, historically based on dioctyl phthalate (DOP).

Find out more

Dryness

Dry solids content (dryness)
The amount of solid remaining after heating at 110 °C for two hours. It is generally expressed as a weight percentage. The opposite parameter is moisture content.

Emulsion

Dispersion of fine droplets of one liquid in another liquid with which it is immiscible.

Find out more

Endotoxin

Toxin originating from the cell envelope of certain bacteria that can be released when they are destroyed, particularly monitored in pharmaceutical processes and sterile filtration.

Find out more

Endotoxin Units

Endotoxin units (EU/mL or IU/mL)
Unit used to measure the concentration of endotoxins present in a liquid, generally expressed in EU/mL or IU/mL.

Filter aid

Granular or fibrous material introduced at the start and during the filtration cycle, depositing on the filter media to form a microporous precoat (also referred to as a filter cake).

Filter bag

Flexible filter element used to retain particles present in a liquid within an industrial filtration system.

Find out more

Filter capsules

Filter capsules operate on the same principle as filter cartridges, with one key difference: they do not require a filter housing. They are self-contained, disposable devices. Particularly suited for laboratory and scale-down applications, filter capsules are available with various connection types and, for aseptic applications, can be sterilized by gamma irradiation.

Filter cartridges

Filter cartridges are ready-to-use filters designed to be installed in a suitable filter housing. Their main characteristic is the flow direction, typically from the outside to the inside. The various technologies available (extruded, pleated, membrane, etc.) enable filtration from several hundred microns down to submicron levels. A wide range of lengths, filtration areas, and end configurations is available to meet both new and existing application requirements.

Filter Clogging

Progressive obstruction of the pores or openings of a filter medium due to the accumulation of particles or contaminants.

Find out more

Filter housing

Enclosure designed to accommodate one or more filter elements to ensure the filtration of a pressurized fluid.

Find out more

Filtration

A purification process in which a fluid passes through a porous medium, resulting in the removal of impurities.

Filtration rating

Filtration rating (cut-off)

Size of particles or microorganisms that a filter medium is capable of retaining with a specified efficiency.

Find out more

HEPA

HEPA (High Efficiency Particulate Air)
HEPA (High Efficiency Particulate Air) refers to high-efficiency filters capable of capturing at least 99.97% of particles measuring 0.3 µm.

Find out more

Hot water sterilization

Sterilization achieved using water heated above 90 °C, maintained in contact with the material for a defined cycle (typically more than 30 minutes).

Hydraulic filter

Device used in a hydraulic or lubrication circuit to retain particles and protect equipment against wear and contamination.

Find out more

Hydrophilic

Describes a material with a high affinity for water that can be easily wetted by it.

Hydrophobic

Describes a material with a low affinity for water and a tendency to repel it.

Hygroscopic

Property of a substance capable of absorbing and retaining moisture from the air.

Industrial Dust Collection

Industrial filtration process designed to capture and retain dust generated by industrial processes.

Find out more

Industrial filters

Filtration devices designed to retain particles, contaminants or microorganisms in industrial processes and environments.

Find out more

Industrial Filtration

Range of processes used to separate particles, contaminants or phases present in liquid or gaseous fluids in industrial applications.

Find out more

Integrity test

A generally non-destructive test used to verify filter performance, particularly its ability to meet bacterial challenge requirements. The most commonly used methods include diffusion flow testing, bubble point determination, and water intrusion testing.

Find out more

Laminar flow

Uniform and controlled airflow moving in a single direction at a constant velocity with minimal turbulence.

Liquid filtration

Process of separating insoluble particles or contaminants present in a liquid using a filter medium.

Find out more

MERV

MERV (Minimum Efficiency Reporting Value)
MERV is a rating system used to assess the efficiency of air filters based on their ability to capture particles of different sizes.

Mesh

American unit used to indicate the mesh size of a sieve or filter medium. The higher the mesh number, the smaller the openings.

Microorganism

Microscopic organism invisible to the naked eye, such as bacteria, yeasts, molds or viruses.

Find out more

Monofilament

Single, continuous filament, generally synthetic, used particularly in textiles and filter media.

MPPS

MPPS (Most Penetrating Particle Size)
MPPS refers to the particle size that is most difficult for a filter medium to capture.

Multifilament

Yarn composed of several twisted fibers, generally synthetic, used particularly in textiles and filter media.

Newtonian fluid

A fluid that obeys Newton’s law of viscosity, exhibiting a linear relationship between shear stress and shear rate. The proportionality constant is the viscosity.

Nominal Filtration Efficiency

Refers to a filter element capable of retaining approximately 90% of particles corresponding to the specified filtration rating.

Find out more

Non-Newtonian fluid

A fluid whose viscosity varies with the shear rate. It does not obey Newton’s law of viscosity.

Oleophilic

Having an affinity for oils; tending to attract or absorb oil.

Oleophobic

Describes a material with a low affinity for oils and a tendency to repel them.

Paint Spray Booth

Ventilated industrial enclosure designed for the application of paints or varnishes, equipped with filtration systems to protect operators and minimize particulate emissions.

Particle Concentration

The mass of a phase per unit volume of a mixture. It can be expressed in several ways: mass fraction (mass of solids relative to total mass), mass ratio (mass of solids to mass of liquid), void ratio (volume of voids to volume of solids), volume fraction (volume of solids relative to total volume), and volume ratio (volume of solids to volume of liquid). Units such as ppm and ppb should be avoided due to their ambiguity.

Particle size distribution

Representation of the distribution of particles according to their size within a sample, generally obtained using a particle counter.

Particles

Discrete quantities of solid matter dispersed in water.

Passivation

Surface treatment designed to improve the corrosion resistance of metals by forming a protective layer on their surface.

PFAS

PFAS (Per- and Polyfluoroalkyl Substances)
Family of highly persistent synthetic chemical substances, used for their non-stick, water-repellent, and heat-resistant properties, but posing risks to human health and the environment.

Find out more

Pickling

Process used to remove oxides, impurities or traces of corrosion from metal surfaces after manufacturing or welding.

PM1 – PM2.5 – PM10

PM1, PM2.5 and PM10 refer to airborne particulate matter with diameters of less than 1 µm, 2.5 µm and 10 µm, respectively.

Point of use

Point of Use (POU)
Distribution point in a purified water production or circulation system from which water can be used or collected.

Pore size distribution

Distribution of pores in a filter medium according to their size. This characteristic directly influences filtration performance, particularly particle retention, flow rate and clogging behavior.

Porosimeter

Instrument used to measure the porosity and pore volume of a filter medium or porous material.

Porosity

Ratio of the pore volume of a material to its total volume, characterizing its ability to allow fluid flow.

Find out more

PPM – PPB – PPT

Units used to express very low concentrations in a fluid: parts per million (ppm), parts per billion (ppb) and parts per trillion (ppt).

Precoat

Porous layer deposited onto a filter support using a filter aid to improve filtration performance.

PREN

PREN (Pitting Resistance Equivalent Number)
PREN (Pitting Resistance Equivalent Number) is an index used to assess the resistance of stainless steel to pitting corrosion. The higher the value, the greater the material’s resistance.

Pressure

A physical quantity defined as force applied per unit area.

Pressure drop

Decrease in pressure experienced by a fluid as it passes through equipment or a filter medium due to friction and resistance to flow.

Find out more

PVDF

PVDF (Polyvinylidene Fluoride)
PVDF (polyvinylidene fluoride) is a polymer used in filtration membranes and components due to its high chemical resistance and good mechanical properties.

Pyrogen

Substance capable of inducing a fever when present in an injectable product or pharmaceutical process.

Reps weave

Type of tightly woven fabric used in certain textile filter media to achieve fine and consistent filtration.

Resistivity

Measure of a liquid’s ability to resist the flow of electric current, particularly used to assess water purity.

Find out more

Rheology

The study of the flow and deformation properties of matter—such as elasticity, plasticity, and viscosity—under an applied stress.

SCC

SCC (Stress Corrosion Cracking)
A form of corrosion that occurs in halogenated environments when a metal is subjected to tensile stress. High nickel content can promote this type of corrosion.

Size-Selective Filtration

Type of filtration characterized by highly precise particle retention based on particle size.

Steam sterilization

Sterilization achieved using saturated steam under pressure at a temperature of at least 121 °C, maintained in contact with the material for a defined cycle (typically more than 30 minutes).

Find out more

Sterilization

Destruction or complete removal of all living microorganisms.

Sterilizing filtration

Filtration is considered sterilizing when it meets the requirements of a bacterial challenge test.

Find out more

Sterilizing Filtration

Filtration process designed to retain microorganisms in order to obtain a sterile liquid or gas without the need for thermal treatment.

Find out more

Sterilizing-Grade Filter

Filter designed to retain bacteria and microorganisms to ensure the sterility of a liquid or gas.

Find out more

Surface tension

Defined as a tensile force acting at the surface of a liquid, tending to minimize its surface area. It is typically expressed in dyne/cm.

Tex

A metric unit system used to describe the linear density of a fiber.
1 tex = weight in grams of 1,000 meters of fiber
1 decitex (dtex) = weight in grams of 10,000 meters of fiber

Thixotropy

Describes a fluid whose viscosity progressively decreases when subjected to agitation or mechanical stress.

Total Organic Carbon (TOC)

Total concentration of carbon present in organic compounds.

Turbidity

Level of cloudiness in a liquid caused by the presence of suspended particles or colloidal matter, generally measured in NTU.

Find out more

ULPA

ULPA (Ultra Low Particulate Air)
Designation applied to filters capable of removing at least 99.9995% of particles with a diameter greater than or equal to 0.3 µm in a single pass.

Find out more

Unidirectional flow

Controlled airflow moving in a single direction at a constant velocity to minimize turbulence and contamination.

Validation

A structured approach aimed at confirming that a process, method, or system consistently performs as intended. The standard framework is the 4Q model: DQ (Design Qualification), IQ (Installation Qualification), OQ (Operational Qualification), and PQ (Performance Qualification).

Find out more

Venturi effect

Phenomenon causing a decrease in pressure when a fluid accelerates through a narrowed section of a conduit.

Viscosity

A property of a fluid that describes its resistance to deformation and flow. This parameter is closely related to pressure drop and energy dissipation in fluid systems.

Warp yarn

Yarn running lengthwise in a woven fabric, particularly used in textile filter media.

Weft yarn

Yarn running perpendicular to the warp yarns in a woven fabric or technical textile.

Work hardening (strain hardening)

Hardening of a metal caused by mechanical deformation at low temperatures, typically through cold working.

CATALOGUE PRODUITS