Non-contractual photographs

PMG 340 Series

Coalescing filters

PMG 340 series liquid-liquid coalescer elements are designed to merge the free and entrained water present in a water-immiscible liquid, to enable its separation by gravity or by means of the filter housing internals. These elements incorporate a pleated hydrophilic coalescing media that efficiently attracts water droplets and promotes their merging into larger drops.
The PMG 340 series is compatible with most filter housings designed to accept elements of this configuration.

Request a quote Documentation

PMG 340 elements are designed for liquid-liquid coalescing processes requiring efficient separation of water or of an immiscible phase, with a choice of media suited to the temperature and pH of the fluid.

Three media are available: polypropylene (pH 2 to 14, up to 82 °C), glass microfiber (pH 6 to 9, up to 171 °C) and nylon (pH 6 to 12, up to 149 °C). Polypropylene is suited to the most aggressive media, glass microfiber to the highest temperatures.

PMG 340 elements are particularly suited for:

  • removal of amines from hydrocarbons;
  • removal of caustic soda from fuels;
  • removal of hydrocarbons from quench water;
  • removal of oil from ammonia, water and caustic soda;
  • removal of water from hydrocarbons and other immiscible liquids.
  • Pleated liquid-liquid coalescer element, Pall LCS configuration
  • Polypropylene media: maximum temperature 82 °C (180 °F), pH 2 to 14
  • Glass microfiber media: maximum temperature 171 °C (340 °F), pH 6 to 9
  • Nylon media: maximum temperature 149 °C (300 °F), pH 6 to 12
  • Drainage layer: cotton sock
  • Hardware: stainless steel
  • Available seals: Viton® or Teflon-encapsulated Viton® (TEV)
  • Outside diameter: 95 mm (3.75 in); inside diameter: 57 mm (2.25 in)
  • Available lengths: 520 mm (20.5 in) or 1,030 mm (40.5 in)
  • Available retention ratings: 1, 5 or 10 µm
  • Recommended change-out at 1 bar (15 PSID) differential pressure; maximum 5.2 bar (75 PSID)
  • Normal flow direction: inside to outside
  • SOE ends: open cap with handle and external O-ring, closed bottom with threaded nut
  • Direct replacement for Pall PhaseSep and AquaSep LCS series, as well as PECO PLPC-P-4XX
  • Typical part number: JPM(media)-(length)340-(rating)-(seal)-SS, e.g. JPMP 20340-5-V-SS

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS