Lifecube MIX
Single-use assemblies
Pre-sterilized single-use 3D mixing bags, made of co-extruded multilayer film with very low gas permeability, equipped with a magnetically driven impeller.
Intended for buffer and culture media preparation, preparation of semi-finished products and batch blending, both upstream and downstream in the process.
Six series according to the impeller (MP, ML, MG, MK, MKP, MS), standard volumes from 50 L to 3,000 L, choice of two films (Renolit 9101 or Lifemeta KA).
- Magnetic agitation (magnetic suction / magnetic suspension), integrated or separate system, compatible with Cobetter mixing systems and other brands
- No cleaning required, quick installation and simple operation
- Inlet / outlet: platinum-cured silicone or TPE tubing with connectors, Tri-clamp TC25 / TC50 or plug
- Tri-clamp powder port 1 1/2″, 3″, 4″ or 8″ with silicone gasket, blind cap and clamp
- Electrode ports: vertical threaded, angled threaded, bioreactor probe sleeve, 3/4″ or 1/2″ HB bag port, 3/4″ HB to PG13.5 threaded port; thermal electrode sleeve for temperature probe
- Sampling: needlefree swabable valve or sampling plug
- Custom: bag dimensions adapted to the container, tubing, connectors and filters; sensors for in-line monitoring; hardware with audit trail and automatic management available
- Double-bagged; manufactured under ISO 9001:2015 in ISO Class 4.8 / ISO 7 / ISO 8 cleanroom; 100% leak tested
- Applications: buffer and culture media preparation, preparation of semi-finished products, batch blending
- Film: Renolit 9101 or Lifemeta KA; 230 µm ULDPE fluid contact layer, 20 µm EVOH gas barrier
- Sterilization: gamma irradiation 25–45 kGy, dose verified per ISO 11137
- Bacterial endotoxins: < 0.25 EU/mL on aqueous extract (LAL, USP <85>)
- Particulates: eluate compliant with USP <788> (large-volume parenterals)
- Biological reactivity: USP <87> (in vitro) and USP <88> (in vivo), Class VI
- ADCF raw materials (animal-derived component free), compliant with FDA 21 CFR 177-182 (indirect food additives)
- Agitation speeds: indicative maximum values, varying according to the bag, the mixed volume, the solution and the mixer brand; to be confirmed under actual conditions
- Impeller height: measured from the weld plate to the top of the impeller
- Standard equipment: 4″ Tri-clamp powder port (silicone gasket, blind cap, clamp); needlefree valve on 20 cm sampling line, Lifemeta STT 1/4″ × 7/16″
- Customizable inlet / outlet line diameter and length
Available versions
| Series | Impeller | Materials | Volume | Fluid contact surface | Height | Indicative max. speed |
|---|---|---|---|---|---|---|
| MP | MPM | Body, weld plate and cap HDPE; bearing PVDF + silicon nitride | 20 L – 3,000 L | 716 cm² | 8 cm | ≤ 300 rpm |
| ML | MPL | Body, weld plate and cap HDPE | 20 L – 1,000 L | 706 cm² | 8 cm | ≤ 210 rpm |
| MG | MCX20 | Body and weld plate HDPE; bearing zirconia + PEEK | 20 L | 558 cm² | 5 cm | ≤ 250 rpm |
| MG | MCX50 | Body and weld plate HDPE; bearing zirconia + PEEK | 50 L | 818 cm² | 5 cm | ≤ 250 rpm |
| MG | MCX100 | Body and weld plate HDPE; bearing zirconia + PEEK | 100 L – 3,000 L | 1,058 cm² | 12 cm | ≤ 250 rpm |
| MK | MK11 | Body PP; weld plate HDPE | 1 L – 50 L | 155 cm² | 2 cm | ≤ 1,000 rpm |
| MK | MK12 | Body PP; weld plate HDPE | 100 L – 200 L | 397 cm² | 3 cm | ≤ 500 rpm |
| MK | MK13 | Body PP; weld plate HDPE | 500 L – 1,000 L | 809 cm² | 4 cm | ≤ 250 rpm |
| MKP | MK21 | Body PP; weld plate HDPE | 100 L – 200 L | 730 cm² | 5 cm | ≤ 375 rpm |
| MKP | MK215 | Body PP; weld plate HDPE | 500 L | 796 cm² | 6 cm | ≤ 375 rpm |
| MKP | MK22 | Body PP; weld plate HDPE | 1,000 L – 3,000 L | 1,236 cm² | 6 cm | ≤ 380 rpm |
| MS | MS | Body and weld plate HDPE | 50 L – 3,000 L | 1,316 cm² | 4 cm | ≤ 750 rpm |