Non-contractual photographs

LGM Series

Coalescing filters

The LGM series is a range of liquid-gas coalescing cartridges with multilayer meltblown media, developed to cost-effectively remove water, condensates, oil, amines and glycols entrained in gas.
It operates as a standard coalescer, with inside-to-outside flow.

Request a quote Documentation

LGM cartridges are designed for liquid-gas coalescing applications requiring high efficiency, good drainage and resistance to severe process conditions.
The multilayer media is available in polypropylene or polyester, depending on the process temperature. Three efficiency grades are available, from 99.5 % to 99.99 % on droplets of 0.3 µm and larger, with a downstream residual liquid content from 50 to less than 2 ppbw depending on the grade.
The core and end caps are metallic. The cartridges are available in three lengths, with SOE flat gasket and Viton® seal.

LGM cartridges are particularly suited for:

  • compressor protection;
  • protection of amine sweetening equipment;
  • removal of glycol carryover;
  • natural gas processing plants, power plants and compressor stations.
  • Multilayer meltblown coalescing media with graded structure
  • Media available in polypropylene (PP) or polyester
  • Metallic core and end caps
  • Seals: SOE flat gasket and Viton®
  • Grade G0V: 99.99 % of droplets of 0.3 µm and larger; effluent less than 8 ppbw
  • Grade G0Y: 99.98 % at 0.1 µm and larger and 99.99 % at 0.3 µm and larger; effluent less than 2 ppbw
  • Grade G0X: 99.5 % of droplets of 0.3 µm and larger; effluent less than 50 ppbw
  • Maximum continuous temperature: 82 °C (180 °F) in polypropylene, 116 °C (240 °F) in polyester
  • Outside diameter: 112 mm (4.4 in); inside diameter: 76 mm (3.0 in)
  • Lengths: 305 mm (12 in), 610 mm (24 in) or 914 mm (36 in)
  • Recommended change-out at 1.0 bar (14 PSID) differential pressure
  • Maximum recommended reverse differential pressure (outside-to-inside): 1.7 bar (25 psi)
  • Normal flow direction: inside to outside
  • Direct replacement for Dynaceptor cartridges
  • Typical part number: 11PFG0X-36BVAD1

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS