F20 Housing
F20 housing 6″1/2 1/2″ BSP inlet/outlet
3-piece, with frame, blue/SAN
The range of filter elements in porous plastic, stainless steel or washable synthetic fiber provides filtration from 25 µm to 1000 µm. The frame must be ordered for all elements. A different color is used for each filter sleeve so that the filtration rating in use can be checked at a glance.
A clamping ring joins the bowl and the head, allowing easy manual assembly and disassembly. Sealing is ensured without any particular tightening effort. The polymer-based construction of the various parts (filled polypropylene) gives the F20 excellent chemical compatibility with most fluids used.
The range of filter elements in porous plastic, stainless steel or washable synthetic fiber provides filtration from 25 µm to 1000 µm. The frame must be ordered for all elements. A different color is used for each filter sleeve so that the filtration rating in use can be checked at a glance.
- Lightweight, compact 3-part filter
- Length: 6-1/2″
- Available with a wide range of filter sleeves for liquids or gases, to be mounted on a frame
- Available with a transparent bowl (in styrene acrylonitrile or Durethan®) or an opaque bowl (in polypropylene)
- Optional plastic drain
- 1/2″, 1/4″ or 3/8″ BSP connection
- Brass positioning insert
OPERATING CONDITIONS
- Maximum operating temperature: 50°C
- Maximum pressure: 10 bar
- Capacity: 155 cm³ (15.5 L)
- Maximum flow rate: 1.2 m³/h
MATERIALS OF CONSTRUCTION
- Bowl: glass fiber-reinforced polypropylene
(opaque), SAN – styrene acrylonitrile or Durethan® (transparent)
- Head: polypropylene
- Ring: polypropylene
- Drain: polypropylene
- Sleeves: stainless steel, Vyon and nylon for water filtration, epoxy and silicate for air filtration