DN66TC Series
The capsules with DN66TC membrane incorporate a sterilizing-grade hydrophilic double Nylon membrane in ready-to-use capsule formats, designed for sterile filtration in pharmaceutical environments.
The DN66TC capsules incorporate a hydrophilic double Nylon (polyamide 6) membrane with a 0.45+0.22 µm rating, validated as a sterilizing grade according to ASTM F838 with retention of Brevundimonas diminuta. The double-layer construction offers enhanced filtration safety. Four capsule formats are available: Bricap L (standard), Bricap T (with gauge port), WSF (compact) and Brisip SP3 (process with vent/drain valves).
- Validated sterilizing grade: retention of 10⁷ cfu/cm² of Brevundimonas diminuta (ATCC 19146) according to ASTM F838
- Hydrophilic double Nylon membrane — enhanced filtration safety
- Single rating: 0.45+0.22 µm
- Integrated capsule formats — no housing required
- Sterilization options: autoclavable, gamma compatible, sterile (gamma irradiated)
- Compliant with FDA 21 CFR 177–182 requirements
AVAILABLE FORMATS
- Bricap L: L02 / L03 / L05 / L10 / L20 / L30
- Bricap T: T10 / T20 / T30 (with integrated gauge port)
- WSF: compact 5″ capsule
- Brisip SP3: process capsule with vent and drain valves
MATERIALS
- Filter media: hydrophilic Nylon (polyamide 6) — double layer
- Supports: polypropylene, PET
- Core, cage, end caps: polypropylene
- Capsule body: polypropylene (Bricap L, Bricap T, WSF) / polyetherimide (Brisip SP3)
- Internal adapter support: 316L stainless steel (Brisip SP3)
- Seals: silicone
- Vent seals: silicone
FILTRATION CHARACTERISTICS
- Filtration rating: 0.45+0.22 µm (all formats)
- Filtration efficiency: sterilizing grade (retention ≥ 10⁷ cfu/cm² B. diminuta according to ASTM F838)
- Effective filtration area (EFA):
- Bricap L10: 0.58 m² (6.2 ft²)
- Brisip SP3: 0.16 m² (1.7 ft²)
- Bricap L02, L03, L05, L20, L30 / Bricap T / WSF: not documented in the Validation Guide
DIMENSIONS (Brisip SP3)
- Overall length: 159 mm (6.3 in.)
- Body diameter: 81 mm (3.2 in.)
CONNECTIONS
- Bricap L — inlet and outlet: S — 38 mm (1 1/2″) Sanitary Flange / T — 19 mm (3/4″) Sanitary Flange / K — 14 mm (9/16″) Sanitary Flange / D — 25 mm (1″) Hose Barb / M — 19 mm (3/4″) Hose Barb / X — 16 mm (5/8″) Hose Barb / V — 14 mm (9/16″) Hose Barb / H — 13 mm (1/2″) Hose Barb / Y — 9.6 mm (3/8″) Hose Barb
- Bricap L — vent/drain: 6 mm (1/4 in.) hose barb with O-ring
- Bricap T — gauge port: S — 38 mm (1 1/2″) Sanitary Flange / T — 19 mm (3/4″) Sanitary Flange / N — none
- Bricap T — inlet and outlet: SS — 38 mm Sanitary Flange I&O / SM — 38 mm Sanitary Flange inlet + 19 mm Hose Barb outlet / ST — 38 mm Sanitary Flange inlet + 19 mm Sanitary Flange outlet
- Brisip SP3 — inlet and outlet: S — 38 mm (1 1/2″) Sanitary Flange
- Brisip SP3 — vent and drain valves: P — 6 mm (1/4″) hose barb / X — Stäubli quick coupling + 6 mm hose barb / T — Stäubli quick coupling / V — 13 mm (1/2″) Sanitary Flange
OPERATING CONDITIONS
- Maximum operating pressure: 5.5 bar (80 psi) at 25 °C / 1.0 bar (15 psi) at 80 °C
- Maximum differential pressure (forward direction): 5.5 bar (80 psi) at 25 °C / 1.0 bar (15 psi) at 80 °C
- Maximum differential pressure (reverse direction): 2.1 bar (30 psi) at 25 °C
INTEGRITY TESTS (at 20 °C)
- Bubble point (water, air): ≥ 3.0 bar (44 psi)
STERILIZATION
- Bricap L / Bricap T — autoclavable: 10 cycles of 30 min at 121 °C (no in-line SIP)
- Bricap L — gamma compatible: gamma irradiation 25-45 kGy, or autoclave 5 cycles of 60 min at 121 °C
- Bricap L — sterile: gamma irradiation 25-45 kGy in sterile packaging (not re-sterilizable)
- Brisip SP3 — in-line SIP: 10 cycles of 30 min at 121 °C (< 0.3 bar, 5 psi)
- Brisip SP3 — autoclave: 10 cycles of 30 min at 121 °C
RECOMMENDED PRE-RINSE (TOC / CONDUCTIVITY)
- Bricap L10: 20 L (ultrapure water)
- Brisip SP3: 5 L (ultrapure water)
- After pre-rinse: compliant with USP <643> (TOC) and USP <645> (conductivity) at WFI specifications at 25 °C
VALIDATIONS AND CERTIFICATIONS
- Bacterial retention: 10⁷ cfu/cm² Brevundimonas diminuta (ATCC 19146) according to ASTM F838
- Particulate release: compliant with USP <788>
- Non-fiber releasing: compliant with 21 CFR 210.3 (b) (6)
- Bacterial endotoxins: < 0.25 EU/mL (Amebocyte Lysate, USP <85>)
- USP <87> Cytotoxicity: compliant (Bricap L)
- USP <88> Biological reactivity: compliant, Class VI-121 °C
- FDA Indirect Food Additive: compliant with 21 CFR 177–182
QUALITY TRACKING
- Full traceability by lot number and serial number
- 100% integrity test before shipment
- Individual certificate of conformity
- Manufactured in an ISO Class 8 clean zone
- Quality system compliant with ISO 9001:2015 and cGMP