Non-contractual photographs

Compact VCBA

SKU : 16VCBA
Capsule filters

Disposable microfiltration capsules with hydrophilic pleated PES membrane and integrated pre-filtration layer, for small-volume liquid process applications.
The filter is sealed in the shell: no housing to buy or clean, and reduced operator exposure to the fluid.
Available from 0.2 to 1.2 µm, with several connection types.

Request a quote Documentation

  • Naturally hydrophilic polyethersulfone (PES) membrane, with low protein binding, with integrated pre-filtration layer (BA grade) for high flow
  • Thermally welded construction, adhesive-free; 100% polypropylene hardware
  • Pyrogen-free, autoclavable several times to extend service life and reduce consumables cost
  • Materials compliant with FDA CFR Title 21 and listed in EU Regulation 10/2011 (Annex 1)
  • Manufactured in a clean room under an ISO quality system; full component traceability by lot number
  • Integrity testing possible (bubble point, diffusion); complete validation guide available
  • Supplied with 1/4″ female luer-lok and vent plugs
  • Applications: development and pilot, critical hospital water (endoscope washers, dialysis), small and medium batches, multi-product installations
  • Membrane: polyethersulfone (PES) with integrated pre-filtration layer; membrane support and assembly: polypropylene
  • Outer diameter: 66 mm; typical filtration area: 0.05 m²
  • Filtration ratings: 0.2 / 0.45 / 0.65 / 0.8 / 1.0 / 1.2 µm
  • Water flow (ΔP at 5 L/min): ≈ 410 mbar at 0.2 µm, ≈ 230 mbar at 0.45 µm, ≈ 115 mbar at 0.65 µm and above
  • Max. temperature: 43 °C at 2.0 bar
  • Max. pressure: 5.5 bar at 20 °C (liquid), 4.1 bar at 20 °C (gas)
  • Max. ΔP: 3.4 bar (forward direction), 2.7 bar (reverse direction) at 20 °C; recommended replacement ΔP: 2.5 bar
  • Steam sterilization: 121 °C, 25 cycles of 30 min; hot water: 90 °C, 30 min
  • Chemical sanitization: hydrogen peroxide, peracetic acid, sodium hypochlorite and other products, at usual concentrations
  • Reference: 16VC + BA + rating + length + inlet connection + outlet connection + marking (e.g. 16VCBA001C2JJA: PES with pre-filtration layer, 12 mm hose barb connections)

Filtration ratings and integrity test (in water)

Rate Code Bubble point Diffusion (cc/min/10″)
0,2 µm 002 3,4 bar ≤ 2,4 à 2,41 bar
0,45 µm 004 1,72 bar —
0,65 µm 006 1,31 bar —
0,8 µm 008 1,03 bar —
1,0 µm 010 0,69 bar —
1,2 µm — 0,60 bar —

Available connections

Code Connection (inlet / outlet) Lenght
H Straight hose barb 3 mm 74 mm
I Straight hose barb 6 mm 73 mm
J Straight hose barb 12 mm 89 mm
K  1/2″ sanitary flange (BS4825) 99 mm
L Luer-lok 64 mm

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS