Compact VCB
SKU : 16VCB002-09GGA
Capsule filters
Disposable microfiltration capsules with hydrophilic pleated PES membrane, for small-volume liquid process applications.
The filter is sealed in the shell: no housing to buy or clean, and reduced operator exposure to the fluid.
Available from 0.03 to 1.0 µm, with several connection types.
- Naturally hydrophilic polyethersulfone (PES) membrane, with low protein binding, for high-flow filtration
- Thermally welded construction, adhesive-free; 100% polypropylene hardware
- Pyrogen-free, autoclavable several times to extend service life and reduce consumables cost
- Materials compliant with FDA CFR Title 21 and listed in EU Regulation 10/2011 (Annex 1)
- Manufactured in a clean room under an ISO quality system; full component traceability by lot number
- Integrity testing possible (bubble point, diffusion); complete validation guide available
- Supplied with 1/4″ female luer-lok and vent plugs
- Applications: development and pilot, critical hospital water (endoscope washers, dialysis), small and medium batches, multi-product installations
- Membrane: polyethersulfone (PES); membrane support and assembly: polypropylene
- Outer diameter: 66 mm; typical filtration area: 0.05 m²
- Filtration ratings: 0.03 / 0.1 / 0.2 / 0.45 / 0.65 / 0.8 / 1.0 µm
- Max. temperature: 43 °C at 2.0 bar
- Max. pressure: 5.5 bar at 20 °C (liquid), 4.1 bar at 20 °C (gas)
- Max. ΔP: 3.4 bar (forward direction), 2.7 bar (reverse direction) at 20 °C; recommended replacement ΔP: 2.5 bar
- Steam sterilization: 121 °C, 25 cycles of 30 min; hot water: 90 °C, 30 min
- Chemical sanitization: hydrogen peroxide, peracetic acid, sodium hypochlorite and other products, at usual concentrations
- Reference: 16VCB + rating + length + inlet connection + outlet connection + marking (e.g. 16VCB001C2JJA: PES, biological grade, 0.1 µm, 12 mm hose barb connections)
Filtration ratings and integrity test (in water)
| Rating | Code | Bubble point | Diffusion (cc/min/10″) |
|---|---|---|---|
| 0,03 µm | 00A | — | ≤ 2,4 à 4,13 bar |
| 0,1 µm | 001 | — | ≤ 2,4 à 3,31 bar |
| 0,2 µm | 002 | 3,4 bar | ≤ 2,4 à 2,41 bar |
| 0,45 µm | 004 | 1,72 bar | — |
| 0,65 µm | 006 | 1,31 bar | — |
| 0,8 µm | 008 | 1,03 bar | — |
| 1,0 µm | 010 | 0,69 bar | — |
Available connections
| Code | Connection (inlet / outlet) | Length |
|---|---|---|
| H | Straight hose barb 3 mm | 74 mm |
| I | Straight hose barb 6 mm | 73 mm |
| J | Straight hose barb 12 mm | 89 mm |
| K | 1/2″ sanitary flange (BS4825) | 99 mm |
| L | Luer-lok | 64 mm |