Compact PC
Capsule filters
Disposable capsules with pleated polypropylene depth media, for liquid and gas filtration in small volumes.
The filter is sealed in the shell: no housing to buy or clean, and reduced operator exposure to the fluid. Available from 0.5 to 40 µm, with several connection types.
- 100% polypropylene pleated depth media, wide chemical compatibility, absolute retention ratings
- Thermally welded construction, adhesive-free; 100% polypropylene hardware
- Pyrogen-free, autoclavable several times to extend service life and reduce consumables cost
- Materials compliant with FDA CFR Title 21
- Manufactured in a clean room under an ISO quality system; full component traceability by lot number
- Supplied with 1/4″ female luer-lok (vent and drain) and plugs
- Complete validation guide available
- Applications: development and pilot, laboratory water and printing equipment, critical hospital water (endoscope washers, dialysis), vents and process air, small and medium batches, multi-product installations
- Media, support and assembly: polypropylene
- Outer diameter: 66 mm; typical filtration area: 0.05 m²
- Filtration ratings: 0.5 / 0.6 / 1.2 / 2.5 / 5 / 10 / 20 / 40 µm
- Max. temperature: 43 °C at 2.0 bar
- Max. pressure: 5.5 bar at 20 °C (liquid), 4.1 bar at 20 °C (gas)
- Max. ΔP: 3.4 bar (forward direction), 2.7 bar (reverse direction) at 20 °C; recommended replacement ΔP: 2.5 bar
- Steam sterilization: 121 °C, 25 cycles of 30 min; hot water: 90 °C, 30 min
- Chemical sanitization: hydrogen peroxide, peracetic acid, sodium hypochlorite and other products, at usual concentrations
- Reference: 16PC + G (general grade) + rating + length + inlet connection + outlet connection + marking (e.g. 16PCG005C2JJA: polypropylene, 0.5 µm, 12 mm hose barb connections)
Filtration ratings and water flow
| Rate | Code | ΔP à 5 L/min (mbar, eau) |
|---|---|---|
| 0,5 µm | 005 | ≈ 1 130 |
| 0,6 µm | 006 | ≈ 1 130 |
| 1,2 µm | 012 | ≈ 525 |
| 2,5 µm | 025 | ≈ 400 |
| 5 µm | 050 | ≈ 350 |
| 10 µm | 100 | ≈ 350 |
| 20 µm | 200 | ≈ 235 |
| 40 µm | 400 | ≈ 235 |
Available connections
| Code | Connection (inlet / outlet) | Lenght |
|---|---|---|
| H | Straight hose barb 3 mm | 74 mm |
| I | Straight hose barb 6 mm | 73 mm |
| J | Straight hose barb 12 mm | 89 mm |
| K | 1/2″ sanitary flange (BS4825) | 99 mm |
| L | Luer-lok | 64 mm |