Non-contractual photographs

Cobetter BevPure NY

Pleated filter cartridges

BevPure NY filter cartridges are made of an intrinsic Nylon66 membrane.
They are specially designed for bioburden reduction and final filtration of a wide range of food and beverage solutions.

Request a quote Documentation

Features and benefits

  • Intrinsic water wettability
  • The Nylon66 membrane removes endotoxins through the formation of positively charged Zeta particles
  • A high bubble point ensures more reliable retention efficiency
  • Low pressure drops and high flow rates
  • Extended service life
Quality standards
  • Retention of 10⁷ cfu/cm² of Brevundimonas diminuta (ATCC® 19146) according to ASTM F838
  • 100% integrity testing during manufacture
  • Each filter is fully traceable thanks to a unique serial number
  • These products are manufactured in a facility compliant with ISO 9001:2015 practices
  • Full regulatory compliance with:
    • Bacterial endotoxins: the aqueous extract of the autoclaved filter contains < 0.25 EU/mL, determined by the LAL (Limulus Amebocyte Lysate) test, USP <85>
    • Non-fiber releasing: the component materials meet the criteria of a “non-fiber releasing filter” as defined in 21 CFR 210.3 (b)(6)
    • Toxicity of component materials: compliant with the criteria of the USP <88> biological reactivity test for Class VI-121°C plastics

Materials

  • Filter media: hydrophilic Nylon 66 membrane
  • Support: PET
  • Cage/Core/End caps: Polypropylene

Operating conditions

  • Max. operating pressure: 6.9 bar (100 psi) at 25 °C / 4.0 bar (58 psi) at 60 °C / 2.4 bar (35 psi) at 80 °C
  • Max. differential pressure: Forward direction: 6.9 bar (100 psi) at 25 °C / 4.0 bar (58 psi) at 60 °C / 2.4 bar (35 psi) at 80 °C, Reverse direction: 3.0 bar (44 psi) at 25 °C / 1.0 bar (15 psi) at 80 °C
  • Effective filtration area: 0.69 m² (8.1 ft²) / Ø69-10 inches
  • In-line steam sterilization: Up to 50 cycles (121 °C for 30 min, < 0.3 bar per cycle)
  • Autoclave: Up to 50 cycles (121 °C for 30 minutes)

Integrity test data (Bubble point)

  • BP: ≥ 0.38 MPa (water), 0.1 µm + 0.1 µm
  • BP: ≥ 0.34 MPa (water), 0.22 µm + 0.22 µm
  • BP: ≥ 0.30 MPa (water), 0.45 µm + 0.22 µm

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS