Non-contractual photographs

AGS Series

Coalescing filters Filter housings

The AGS series is a range of coalescing separator filters designed to the ASME code, intended to remove oil, water and other liquid aerosols from compressed air and gas lines. Its multilayer glass fiber pleated cartridge retains a minimum of 99 % of droplets and particles of 0.3 µm and larger.

Its design provides high flow rate, low pressure drop and long service life. It covers operating pressures from 12 to 51 bar and meets the requirements of OEM specifications as well as downstream equipment protection.

Request a quote Documentation

AGS filters are designed for gas-liquid separation applications requiring high efficiency on dispersed liquids and solid particles, with reduced pressure drop.

Fine droplets entering the inside of the cartridge are captured by the media and merged into larger drops. These flow to the outside of the cartridge, fall by gravity into the filter housing sump and are discharged through the drain connection. An outer polyester foam sleeve provides drainage and prevents liquid re-entrainment downstream.

The inside diameter of the cartridge is close to that of the inlet and outlet connections, ensuring a smooth flow transition and limiting pressure drop. The housings are designed and built to ASME Section VIII, Division 1, in carbon steel, with a 304 or 316 stainless steel version and special designs available.

The range includes three housing series: AGS (up to 180 psig), AGSH (up to 285 psig) and AGSHH (up to 740 psig), from 1/2″ to 10″ connections. An automatic float drain is available as an option.

AGS filters are particularly suited for:

  • separation of oil, water and other liquid aerosols in compressed air and gases;
  • prefiltration upstream of an air dryer, to improve system efficiency and equipment service life;
  • protection of equipment against liquids and solids in gas networks;
  • installations subject to OEM specifications.
  • Radial-fin pleated cartridge in multilayer glass fiber, on carbon steel core
  • Minimum 99 % efficiency at 0.3 µm (dispersed liquids and solid particles)
  • Outer polyester foam drainage sleeve
  • Plated carbon steel end caps with O-ring
  • Cartridge available with stainless steel internals for corrosive media
  • Standard cartridge maximum temperature: 93 °C (200 °F); optional materials up to 204 °C (400 °F)
  • Standard neoprene closure gasket: 149 °C (300 °F) maximum
  • Spiral wound gasket (304 stainless steel and graphite) on AGSH and AGSHH series
  • Housing in carbon steel, or 304 or 316 stainless steel
  • ASME Section VIII, Division 1 design
  • AGS: 180 psig (12.4 bar); AGSH: 285 psig (19.7 bar); AGSHH: 740 psig (51 bar); AGS 110 limited to 150 psig (10.3 bar) at 38 °C
  • Pressures up to 1,440 psi (99 bar) available; up to 6,000 psig (414 bar) for high-pressure designs
  • Connections from 1/2″ to 10″: threaded (FPT/MPT) or flanged (150 lb ANSI, 300 lb ANSI for the AGSHH series)
  • Flow rates from 94 to 60,940 SCFM depending on model and operating pressure
  • Filtration surface area from 1.4 to 41.9 ft² (0.13 to 3.9 m²) depending on model
  • Large collection sump, 1/4″ NPT gauge taps (AGS 115 and above)
  • Options: automatic float drain (2 gpm max.) with shut-off valve, differential pressure gauges, sight glasses, level switches
  • Models 160 to 190 on three support legs

    Request a quote

      Request for documentation

      CATALOGUE PRODUITS